Skip navigation

VM10 vision module

  • VM10The VM10 vision module can be used for inspecting features or holes that are typically larger than 1 mm, with a maximum field of view of 40 mm × 50 mm
  • Typical applications for the VM10 module include the inspection of thin sheet metal parts like combustor casings for aerospace engines

Dimensions

VM10 dimensions

NOTE: Dimensions in mm (in).

Specification


Measurement
1 mm or larger diameter holes / features
Target applications
Aero engine combustor casings
Field of view
50 mm × 40 mm
Depth of field
5 mm (±2.5 mm)
Stand-off80 mm
Illumination2 rings (8 + 16 LEDs)

VM10 stand-off

RVP stand-off - VM10

Stand-off is described as the distance required between the bottom of the vision module and the part feature to ensure optimum metrology performance.

Vision modules have different stand-off distances to allow the inspection of a variety of parts. The stand-off distance for the VM10 module is 80 mm.

VM10 field of view

RVP field of view - VM10

The field of view for each vision module determines the size of feature than can be inspected using a single exposure when the RVP system is at the correct stand-off distance.

The VM10 field of view is 50 mm × 40 mm; any feature that requires inspection must be within these dimensions to be captured with a single exposure.

RVP module depth of field

The depth of field is the acceptable tolerance range for the focal point of the vision system that will still provide accurate metrology performance.

If the stand-off distance means that the focal point of the vision probe is outside of the 5 mm depth of field tolerance, then a reduction in metrology performance will be apparent.

RVP vision module - depth of field

VM10
A2.5 mm
B5 mm


Part number

REVO-2 RVP kits

RVP REVO-2 vision probe kit

A-5378-0080

VM10 vision module kit

A-5378-0082

VM11-2 vision module kit

A-5378-0093

VM12 vision module kit

A-5378-0088

ACM kit

A-5378-0094

VPCP vision probe change port kit

A-5378-0081

VMCP vision module change port kit

A-5378-0083

VA11 vision artefact kit

A-5378-0089

VA90 calibration adaptor

A-5378-0091


NOTE: Please visit the REVO-2 page for a full list of REVO-2 system and associated product part numbers.